Based in Wingfield SA 5013
Our roller doors open onto Hanson Rd. If you run trucks, bins or plant anywhere in the Wingfield industrial precinct, your fabricator is a two-minute drive away - no freight, no waiting on a shipment, no middleman.
Our front gate - we're on Hanson Rd
5.0 RATING
5.0 RATING
Kingpin Engineering re-barrelled two of our agitator drums and had them balanced and back on the trucks within the week. Pouring again with no downtime - proper engineering, not a patch job.
Needed a hook-lift skip bin built to suit our new truck. Sent Kingpin a photo of the fleet and they matched it exactly. Heavy-duty steel and it's copped a beating with no issues.
Brought a stack of thick plate and a CAD file to Kingpin Engineering for CNC plasma cutting and folding. Cut clean, bent dead-on spec, and turned around faster than anyone else would quote.
Four workshops in one, all under a single Wingfield roof. Drive in, describe the job, and walk the floor with the person who will build it.
New drums, drum repairs, agitator and hydraulic motor repairs. We get your mixer fleet off the bench and back pouring.
Learn More
Custom-built skip bins to suit your truck - Marrel, hook-lift and more. Plus fast repairs on damaged bins.
Learn More
Heavy plate cutting and folding. Bring us your CAD file or your design - we cut and bend the big stuff.
Learn More
General engineering, truck body modifications, and specialist aluminium welding built to your design.
Learn MoreLocal Knowledge
Wingfield is where Adelaide's heavy industry actually happens. Between the waste and recycling centre, the transport yards off Cormack Road and the batching plants feeding the northern suburbs, there is more steel moving through this postcode on any given morning than most of the state sees in a week.
That is exactly why we set up here. Being inside the precinct means a cracked skip bin can be dropped off before smoko and assessed the same morning. It means we can put eyes on a mixer at your yard rather than asking you to trailer it across town. And it means our own supply chain - steel merchants, blasters, transport - all sits within a few kilometres of the bench.
We are not a national chain with a Wingfield postcode on the invoice. We are the workshop on Hanson Rd, and most of our customers could walk here.
We also cover
Split floors, cracked walls and bent rails on skip and hook-lift bins repaired without waiting on an import container.
Body modifications, chassis plating, tray builds and ladder racks for the depots that line the precinct.
Agitator drums built, re-barrelled, balanced and tested a short run from the plants they feed.
At Kingpin Engineering, we’re more than just fabricators - we’re a team dedicated to setting the standard for what an engineering workshop should be. Founded by our director, the business was built on three non-negotiables: precision engineering, honest workmanship, and genuine customer care.
Kingpin Engineering started with a simple but powerful vision: to be the one workshop a customer could trust with everything - from a precision-engineered agitator drum to the one-off repairs most shops turn away. With years of hands-on experience, our founder saw firsthand how customers were bounced from supplier to supplier and let down by low standards - and knew there had to be a better way.
With that, the new standard for heavy fabrication and concrete engineering was born.
When the workshop is around the corner, quoting stops being a phone game. Wingfield operators can walk the job with us, see the steel, and get a straight answer on scope and timeframe before anything is cut.
With engineering experience built over years on the workshop floor, every job at Kingpin starts with a clear plan - so you know the scope, the spec and the timeframe before we cut a single piece of steel.
That means we deliver the utmost care on every job we take on, from a 16m³ agitator drum to a one-off repair, without ever sacrificing attention to detail.
Backed by Certification: We wear our quality with confidence. You’re trusting us with serious equipment, so the least we can do is back it - with material certificates, welding procedure documentation and Australian-Standard engineering on every build that calls for it.
One Workshop, Every Job: The big concrete OEMs won’t touch your skip bin. The bin factories won’t roll a spiral blade. We do both - plus the cutting, bending, welding and mending others turn away - under one roof, on one invoice.
Skilled
Workers
Drive it in, or we will come to your yard. Either way you get a straight answer on what it takes to fix or build it.
Wingfield is one of the areas we cover from our workshop floor. Our front gate - we're on Hanson Rd. Tap any area below to see what we build there.
438-440 Hanson Rd, Wingfield SA 5013. Plenty of hardstand for trucks and trailers, and you can drive a loaded rigid straight in. Come between 8am and 5pm on a weekday or 8am to 12:30pm Saturday.
Yes. Wingfield locals can drop in during workshop hours and we will look at it there and then. If it is a bigger rebuild we will book it into the schedule while you are standing there.
No. You are inside the precinct, so there is nothing to add. That is one of the reasons operators up and down Hanson Rd and Cormack Rd use us instead of shipping work interstate.
We're a heavy fabrication and engineering workshop covering four main areas: concrete mixers and agitators, skip bins and waste bodies, CNC plasma cutting and bending, and custom fabrication and welding. Most workshops only do one of these - we do all of them under one roof, from precision-engineered agitator drums right down to one-off repairs.
We design and manufacture agitator drums from 6m³ to 16m³, built from high-tensile wear-resistant steel. Every drum is 3D CAD designed, dynamic-balance tested and water-capacity tested before it leaves our workshop. Need a size or spec not listed? We engineer to your requirement.
Both. We re-barrel and recondition worn drums, repair cracks, replace blades, re-balance and re-coat - bringing a tired agitator back to working life at a fraction of replacement cost. We also rebuild agitator drive motors and repair hydraulic motors and pumps (PMP, Rexroth and Eaton). Send us your drum or your truck and we'll tell you what's worth saving.
Yes. We build custom skip bins - Marrel, hook-lift, craneable and special-purpose - sized to match your truck and your job. Already have bins in your fleet? Send us a photo or a drawing and we'll build to match.
We do. Split floors, cracked walls, bent frames and general wear - we repair and reinforce bins rather than replace them, and get them back into service fast. Unlike the big bin importers, you can bring us a single bin without waiting on a container load or a minimum order.
Absolutely. Send us a CAD file, an engineering drawing, or even a sketch, and we'll cut and bend it on our CNC plasma cutter and press brake - including the big, thick steel smaller shops can't handle. No drawing? Our 3D CAD capability means we can design it, prove it on screen, then build it.
Yes - both steel and aluminium. Toolboxes, steps, brackets, tanks, frames and trade parts, including the aluminium work a lot of shops won't take on. Done properly and built to last.
Always. No job is too small to ask about and none too custom to quote. A snapped bracket, a bent chassis, a part that needs cutting, bending and welding into something new - walk in, describe the problem, and we'll tell you straight whether we can fix it, build it or improve it.
Yes. For OEM and export work we provide Australian-Standard design support, engineering and manufacturing drawings, material certificates, welding procedure documentation, and CKD/SKD container kits for local assembly.
The workshop is open Monday to Friday 8:00am to 5:00pm and Saturday 8:00am to 12:30pm, closed Sunday. We also run a 24/7 emergency callout for breakdowns - if something goes down outside hours, call (08) 7081 3155.
Yes. Our workshop is at 438-440 Hanson Rd, Wingfield SA 5013, and Wingfield is one of the areas we cover regularly - supporting concrete operators, waste and recycling companies, transport fleets, mining and civil contractors and trade businesses. Give us a call on (08) 7081 3155.
Send us the details of your job - drawings or photos help - through our quote form or give us a call on (08) 7081 3155. The more detail you give, the faster and more accurate the quote.
